RMC08-301/DC24V
- 4 pole
- 3 NO / 1 NC contacts
- Contact material AgNi
- Max 8.5 A @ 400 V AC-3
- 3 NO / 1 NC contacts
- Contact material AgNi
- Max 8.5 A @ 400 V AC-3
ELDAS®:
507976284
| Current type | DC |
|---|---|
| Nominal voltage | 24 V |
| Frequency range | 50 / 60 Hz |
|---|---|
| Operating voltage range | 0.85 ... 1.1 UN |
| Pick-up time | 10 ... 15 ms |
| Pick-up voltage | ≤ 0.85 UN |
| Power consumption AC / DC | 8.1 VA / 4 W |
| Release time | 6 ... 15 ms |
| Release voltage | ≥ 0.2 UN AC / ≥ 0.1 UN DC |
| Ambient temperature operation close contact | -20 ... 45 °C |
|---|---|
| Ambient temperature operation open contact | -20 ... 60 °C |
| Color | black |
| Housing material | PA 66 |
| Ingress Protection | IP20 |
| Mounting | DIN rail |
| Operation Altitude | Max. 2 000 m |
| Relative huminity, no condensation | 95 % |
| Storage temperature (no ice) | -30 ... 80 °C |
| Weight | AC: 160 g / DC: 215 g |
| Clearance of open contact | 3.6 |
|---|---|
| Overvoltage category | III |
| Pollution degree | 3 |
| Rated impulse withstand voltage open contact | 6 kV / 1 min |
| Rated insulation voltage | 690 V |
| Contact materials | AgNi |
|---|---|
| Electrical endurance at rated load AC-1 (cycles) | 200 000 |
| Mechanical endurance (cycles) | 10 000 000 |
| Rated current AC-1 | 20 A |
| Rated current AC-3 | 8.5 A, 400 V |
| Rated current DC-3 | 0.25 A, 110 VDC |
| Rated load AC-1 three-phase 400 V | 13 kW |
| Rated load AC-3 three-phase 400 V | 4 kW |
| Rated voltage | 690 V AC |
| Recommended minimum contact load | 50 mA, 17 V |
| Switching frequency at rated load AC-1 (cycles / h) | ≤ 600 |
| Switching frequency at rated load AC-3 (cycles / h) | ≤ 600 |
| Switching frequency at rated load DC-3 (cycles / h) | ≤ 300 |
| Approvals | UKCA,CE,EAC,cULus |
|---|---|
| Standards | IEC/EN 60947 |
| Conductor cross section control / main circuit | 2.5 mm2 / 2.5 mm2 |
|---|---|
| Contact type control / main circuit | Screw connection, M3.5 / M3.5 |
| Nominal screw torque control / main circuit | 1.2 Nm / 1.2 Nm |
| Screwdrive control / main circuit | PZ2 / PZ2 |
| Stripping Length control / main circuit | 10 mm / 10 mm |
Approvals
Documents "RMC08-301/DC24V"
Accessories
