RSC43-311/AC230V

- 3 pole
- 2 Auxiliary contacts 1NO / 1NC
- 3 NO contacts
- Contact material AgSnO2
- Max 43 A @ 400 V AC-3
ELDAS®: 507976140

Current type AC (50 Hz)
Nominal voltage 230 V

Frequency range 50 / 60 Hz
Operating voltage range 0.85 ... 1.1 UN
Pick-up time 10 ... 20 ms
Pick-up voltage ≤ 0.85 UN
Power consumption AC / DC 10 VA
Release time 8 ... 15 ms
Release voltage ≥ 0.2 UN AC

Ambient temperature operation close contact -20 ... 45 °C
Ambient temperature operation open contact -20 ... 60 °C
Housing material PA 66
Ingress Protection IP 20
Mounting DIN rail
Operation Altitude Max. 2 000 m
Relative huminity, no condensation 95 %
Storage temperature (no ice) -30 ... 80 °C
Weight 930 g

Clearance of open contact 3.6
Overvoltage category III
Pollution degree 3
Rated impulse withstand voltage open contact 6 kV / 1 min
Rated insulation voltage 1 000 V

Contact materials AgNi
Electrical endurance at rated load AC-1 (cycles) 200 000
Mechanical endurance (cycles) 3 000 000
Overload current 344 A (10 s)
Rated current AC-1 75 A
Rated current AC-3 43 A, 400 V
Rated current DC-3 6 A, 220 V DC
Rated load AC-1 single-phase 230 V 56 kW
Rated load AC-1 three-phase 230 V 22 kW
Rated load AC-3 single-phase 230 V 22 kW
Rated voltage 1 000 V AC
Recommended minimum contact load 50 mA, 17 V
Switching frequency at rated load AC-1 (cycles / h) ≤ 600
Switching frequency at rated load AC-3 (cycles / h) ≤ 600
Switching frequency at rated load DC-3 (cycles / h) ≤ 300

Approvals UKCA,CE,EAC,cULus
Standards IEC/EN 60947

Conductor cross section control / main circuit 2.5 mm2 / 25 mm2
Contact type control / main circuit Screw connection, M3.5 / M6
Nominal screw torque control / main circuit 0.8 Nm / 4 Nm
Screwdrive control / main circuit PZ2 / PZ2
Stripping Length control / main circuit 11 mm / 16 mm
Approvals
Documents "RSC43-311/AC230V"

Accessories

RSC-AUX02
- NO and/or NC contacts
- Contact material AgNi

RSC-AUX04
- NO and/or NC contacts
- Contact material AgNi

RSC-AUX11
- NO and/or NC contacts
- Contact material AgNi

RSC-AUX20
- NO and/or NC contacts
- Contact material AgNi

RSC-AUX22
- NO and/or NC contacts
- Contact material AgNi

RSC-AUX40
- NO and/or NC contacts
- Contact material AgNi

RSC-RC1
for RSC contactors 12...48VAC

RSC-RC2
for RSC contactors 48...250VAC

RSC-MP-0.16
(0.1...0.16A), 3L, reset/test

RSC-MP-0.25
(0.16...0.25A), 3L, reset/test

RSC-MP-0.4
(0.25...0.4A), 3L, reset/test

RSC-MP-0.5
(0.35...0.5A), 3L, reset/test

RSC-MP-0.63
(0.45...0.63A), 3L, reset/test

RSC-MP-0.8
(0.55...0.8A), 3L, reset/test

RSC-MP-1.0
(0.75...1.0A), 3L, reset/test

RSC-MP-1.3
(0.9...1.3A), 3L, reset/test

RSC-MP-1.6
(1.1...1.6A), 3L, reset/test

RSC-MP-10.0
(7.2...10.0A), 3L, reset/test

RSC-MP-2.0
(1.4...2.0A), 3L, reset/test

RSC-MP-2.5
(1.8...2.5A), 3L, reset/test

RSC-MP-3.2
(2.3...3.2A), 3L, Reset/Test

RSC-MP-4.0
(2.9...4.0A), 3L, reset/test

RSC-MP-4.8
(3.5...4.8A), 3L, reset/test

RSC-MP-6.3
(4.5...6.3A), 3L, reset/test

RSC-MP-7.5
(5.5...7.5A), 3L, reset/test

RSC-MBL1
RSC-MBL1 for RSC09...RSC38

RSC-MBL2
RSC-MBL2 for RSC43...RSC63

RMC-DI
for RMC contactors 6...250VDC