RAC63-310/AC230V
Installation contactors are electromagnetic switching devices designed to reliably switch various types of electrical loads, such as lighting systems, heating, air conditioning, motors, or pumps. They have a rest position and can safely switch, conduct, and interrupt currents under normal operating conditions, as well as in overload situations. The double-break contacts interrupt the circuit at two points simultaneously, reducing contact wear, improving arc suppression during switching, and thus ensuring a particularly long service life.Our installation contactors are equipped with two to four independent contacts, allowing you to switch different voltages at the same time.The hum-free operation makes them suitable for low noise environments.RAC installation contactors are equipped with a manual control function and an integrated slide switch, providing users with three selectable operating modes, including disconnection. This feature supports functional testing during commissioning and simplifies maintenance, ensuring both ease and safety.
| Nominal voltage | 230 V |
|---|---|
| Current type | AC (50 Hz) |
| Release time | 35 ... 45 ms |
|---|---|
| Pick-up voltage | ≤ 0.85 UN |
| Pick-up time | 15 ... 20 ms |
| Operating voltage range | 0.85 ... 1.1 UN |
| Frequency range | 50 / 60 Hz |
| Power consumption AC / DC | 5 VA / 5 W |
| Release voltage | ≥ 0.1 UN |
| Dimensions | 84 x 53.5 x 65.5 mm |
|---|---|
| Housing material | PA 6 |
| Ingress Protection | IP 20 |
| Mounting | DIN rail |
| Operation Altitude | Max. 2 000 m |
| Operation temperature | -15 ... 70 °C |
| Relative huminity, no condensation | 95 % relative humidity |
| Shock test | switched off: 10 g (Z and X axis) / switched on: 15 g (Z axis) and 2 g (X axis) |
| Storage temperature (no ice) | -40 ... 80 °C |
| Vibration test | switched off: 2 g (Z and X axis) / switched on: 3 g (Z axis) and 1 g (X axis) |
| Weight | 420 g |
| Clearance of open contact | 3.6 |
|---|---|
| Overvoltage category | III |
| Pollution degree | 3 |
| Rated impulse withstand voltage open contact | 6 kV / 1 min |
| Rated insulation voltage | 440 V |
| Number of contacts | 3 NO,1 NC |
|---|
| Approvals | UKCA,CE,EAC |
|---|---|
| Standards | IEC/EN 60947,IEC/EN 61095 |
| Stripping Length control / main circuit | 8 mm / 10 mm |
|---|---|
| Dual sleeve control / main circuit | 1 |
| Contact type control / main circuit | Screw connection, M3 / M5 |
| Conductor cross section control / main circuit | 2.5 mm2 / 16 mm2 |
| Max. wire count control / main circuit | 1 |
| Nominal screw torque control / main circuit | 0.6 Nm / 3.5 Nm |
| Screwdrive control / main circuit | PZ1 / PZ2 |
Helpful documents on the "RAC63-310/AC230V"
3D-models "RAC63-310/AC230V"
Documents "RAC63-310/AC230V"
| Nominal voltage | 230 V |
|---|---|
| Current type | AC (50 Hz) |
| Release time | 35 ... 45 ms |
|---|---|
| Pick-up voltage | ≤ 0.85 UN |
| Pick-up time | 15 ... 20 ms |
| Operating voltage range | 0.85 ... 1.1 UN |
| Frequency range | 50 / 60 Hz |
| Power consumption AC / DC | 5 VA / 5 W |
| Release voltage | ≥ 0.1 UN |
| Dimensions | 84 x 53.5 x 65.5 mm |
|---|---|
| Housing material | PA 6 |
| Ingress Protection | IP 20 |
| Mounting | DIN rail |
| Operation Altitude | Max. 2 000 m |
| Operation temperature | -15 ... 70 °C |
| Relative huminity, no condensation | 95 % relative humidity |
| Shock test | switched off: 10 g (Z and X axis) / switched on: 15 g (Z axis) and 2 g (X axis) |
| Storage temperature (no ice) | -40 ... 80 °C |
| Vibration test | switched off: 2 g (Z and X axis) / switched on: 3 g (Z axis) and 1 g (X axis) |
| Weight | 420 g |
| Clearance of open contact | 3.6 |
|---|---|
| Overvoltage category | III |
| Pollution degree | 3 |
| Rated impulse withstand voltage open contact | 6 kV / 1 min |
| Rated insulation voltage | 440 V |
| Number of contacts | 3 NO,1 NC |
|---|
| Approvals | UKCA,CE,EAC |
|---|---|
| Standards | IEC/EN 60947,IEC/EN 61095 |
| Stripping Length control / main circuit | 8 mm / 10 mm |
|---|---|
| Dual sleeve control / main circuit | 1 |
| Contact type control / main circuit | Screw connection, M3 / M5 |
| Conductor cross section control / main circuit | 2.5 mm2 / 16 mm2 |
| Max. wire count control / main circuit | 1 |
| Nominal screw torque control / main circuit | 0.6 Nm / 3.5 Nm |
| Screwdrive control / main circuit | PZ1 / PZ2 |
Approvals
Helpful documents on the "RAC63-310/AC230V"
3D-models "RAC63-310/AC230V"
Documents "RAC63-310/AC230V"
