CRINT-C233/UC24V
| Pick-up voltage | ≤ 0.8 UN |
|---|---|
| Operating voltage range | 0.8 UN … 1.25 UN |
| Power consumption AC / DC | 1 VA / 0.5 W |
| Release voltage | ≥ 0.1 UN |
| Variant | Push-in |
|---|
| - Multi wire (crimped) | 0.34 mm2 / AWG 22 … 1.5 mm2 / AWG 16 |
|---|---|
| - Multi wire (un-crimped) | 0.34 mm2 / AWG 22 … 2.5 mm2 / AWG 14 |
| - Single wire | 0.34 mm2 / AWG 22 … 2.5 mm2 / AWG 14 |
| Conductor cross section control / main circuit | Push-in terminal |
| Housing material | PA |
| Ingress Protection | IP 20 |
| Mounting | TH35 (EN 60715) |
| Operation temperature | -40 ... 55 °C |
| Pick-up time | ≤ 15 ms |
| Release time | ≤ 8 ms |
| Storage temperature (no ice) | -40 ... 85 °C |
| Weight | 59 g |
| Overvoltage category | III |
|---|---|
| Pollution degree | 3 |
| Test voltage contact / coil | 5 kV / 1 min |
| Test voltage open contact | 1 kV / 1min |
| Electrical endurance at rated load AC-1 (cycles) | ≥ 50 000 |
|---|---|
| Inrush current | 15 A, 2.5 ms |
| Maximum contact load AC-1 | 8 A / 250 V AC-1 |
| Maximum contact load DC-1 | 8 A / 30 V DC-1 |
| Mechanical endurance (cycles) | ≥ 10 000 000 |
| Number of contacts | 2 CO |
| Rated current | 8 A |
| Rated load AC | 2 000 VA |
| Recommended minimum contact load | 100 mA / 12 V |
| Approvals | CE,EAC,UKCA,cURus |
|---|---|
| Standards | IEC/EN 61810-1 |
Approvals
