CRINT-C138R/DC110-125V
| Current type | DC |
|---|---|
| Nominal voltage | 110 V-125 V |
| Operating voltage range | 0.8 … 1.2 UN |
|---|---|
| Pick-up voltage | ≤ 0.8 UN |
| Power consumption DC | 150 mW |
| Release voltage | ≤ 0.25 UN |
| Variant | Push-in |
|---|
| - Multi wire (crimped) | 0.34 mm2 / AWG 22 … 1.5 mm2 / AWG 16 |
|---|---|
| - Multi wire (un-crimped) | 0.34 mm2 / AWG 22 … 2.5 mm2 / AWG 14 |
| - Single wire | 0.34 mm2 / AWG 22 … 2.5 mm2 / AWG 14 |
| Conductor cross section cage clamp | 0.75 … 2.5 mm2 |
| Conductor cross section control / main circuit | Push-in terminal |
| Housing material | PA |
| Ingress Protection | IP 20 |
| Mounting | TH35 (EN 60715) |
| Operation temperature | -30 … 70 °C |
| Pick-up time | 1/2 Cycle +1 ms |
| Release time | 1/2 Cycle +1 ms |
| Storage temperature (no ice) | -30 … 85 °C |
| Weight | 30 g |
| Overvoltage category | III |
|---|---|
| Pollution degree | 3 |
| Test voltage contact / coil | 2.5 kV / 1 min |
| Test voltage open contact | 1 kV / 1 min |
| SSR-Typ | TRIAC |
|---|---|
| Inrush current | 80 A, 10 ms |
| Maximum voltage drop | 1.2 V AC |
| Output type | TRIAC |
| Output voltage range | 48 ... 280 V AC |
| Rated current | 2 A |
| Recommended minimum contact load | 20 mA / 5 V |
| Residual current | 1.5 mA |
| Type | Synchronized zero |
| Approvals | UKCA,CE,EAC,Railway,cURus |
|---|---|
| Railway | EN 50155,EN 45545-2 |
| Standards | EN 62314,EN 60664-1 |
Approvals
Documents "CRINT-C138R/DC110-125V"
