CMA-D211/UC24V
2-channel coupling module with manual operation and feedback contact for PLC applications. Features an AUTO-OFF-MAN selector, 12 A / 250 VAC relay output, 24 V AC/DC supply, and screw terminals. Ideal for automatic control, with a functional manual override for maintenance, emergency operation, installation and commissioning.
| Pick-up voltage | ≤ 0.75 UN |
|---|---|
| Operating voltage range | -15 ... 10 % |
| Inputs | 2 digital |
| Frequency range | 45 ... 65 Hz |
| Power consumption AC / DC | 2 x 0.55 VA / 2 x 0.6 W |
| Nominal voltage | 24 V AC/DC |
| Release voltage | ≥ 0.05 UN |
| Categories of environmental protection | RT III |
|---|---|
| Conductor cross section control / main circuit | 2.5 mm², 2 x 1.5 mm² |
| Housing material | PA66 |
| Ingress Protection | IP 20 |
| Mounting | TH35 (IEC 60715) |
| Mounting distance | 0 |
| Nominal screw torque control / main circuit | 0.5 Nm |
| Operation Position | Any |
| Operation temperature | -25 ... 55 °C |
| Storage temperature (no ice) | -40 ... 85 °C |
| Weight | 70 g |
| Overvoltage category | III |
|---|---|
| Pollution degree | 2 |
| Test voltage contact / coil | 1.5 kV / 1 min |
| Test voltage open contact | 1 kV / 1 min |
| Type of insulation | basic |
| Contact materials | AgSnO2 |
|---|---|
| Electrical endurance at rated load AC-1 (cycles) | ≥ 100 000 |
| Maximum contact load AC-1 | 12 A / 250 V AC-1 |
| Maximum contact load DC-1 | 12 A / 30 V DC-1 |
| Mechanical endurance (cycles) | ≥ 10 000 000 |
| Outputs | 2 CO |
| Pick-up time | ≤ 10 ms |
| Rated current | 12 A |
| Rated load AC | 4 000 VA |
| Recommended minimum contact load | 100 mA / 6 V DC |
| Release time | ≤ 5 ms |
| Type of interruption | Micro-interruption |
| Frequency range | 45 ... 65 Hz |
|---|---|
| Max. ripple voltage | 10 % |
| Maximum power consumption | 1.2 W |
| Nominal operating voltage | 24 V AC/DC |
| Tolerance | -15 ... 10 % |
| Contact materials | AgNi |
|---|
| Approvals | CE,UKCA |
|---|---|
| Standards | EN 61810-1 |
Helpful documents on the "CMA-D211/UC24V"
Documents "CMA-D211/UC24V"
| Pick-up voltage | ≤ 0.75 UN |
|---|---|
| Operating voltage range | -15 ... 10 % |
| Inputs | 2 digital |
| Frequency range | 45 ... 65 Hz |
| Power consumption AC / DC | 2 x 0.55 VA / 2 x 0.6 W |
| Nominal voltage | 24 V AC/DC |
| Release voltage | ≥ 0.05 UN |
| Categories of environmental protection | RT III |
|---|---|
| Conductor cross section control / main circuit | 2.5 mm², 2 x 1.5 mm² |
| Housing material | PA66 |
| Ingress Protection | IP 20 |
| Mounting | TH35 (IEC 60715) |
| Mounting distance | 0 |
| Nominal screw torque control / main circuit | 0.5 Nm |
| Operation Position | Any |
| Operation temperature | -25 ... 55 °C |
| Storage temperature (no ice) | -40 ... 85 °C |
| Weight | 70 g |
| Overvoltage category | III |
|---|---|
| Pollution degree | 2 |
| Test voltage contact / coil | 1.5 kV / 1 min |
| Test voltage open contact | 1 kV / 1 min |
| Type of insulation | basic |
| Contact materials | AgSnO2 |
|---|---|
| Electrical endurance at rated load AC-1 (cycles) | ≥ 100 000 |
| Maximum contact load AC-1 | 12 A / 250 V AC-1 |
| Maximum contact load DC-1 | 12 A / 30 V DC-1 |
| Mechanical endurance (cycles) | ≥ 10 000 000 |
| Outputs | 2 CO |
| Pick-up time | ≤ 10 ms |
| Rated current | 12 A |
| Rated load AC | 4 000 VA |
| Recommended minimum contact load | 100 mA / 6 V DC |
| Release time | ≤ 5 ms |
| Type of interruption | Micro-interruption |
| Frequency range | 45 ... 65 Hz |
|---|---|
| Max. ripple voltage | 10 % |
| Maximum power consumption | 1.2 W |
| Nominal operating voltage | 24 V AC/DC |
| Tolerance | -15 ... 10 % |
| Contact materials | AgNi |
|---|
| Approvals | CE,UKCA |
|---|---|
| Standards | EN 61810-1 |
Approvals
Helpful documents on the "CMA-D211/UC24V"
Documents "CMA-D211/UC24V"
